Door Replacement Cost in Edmonton: Entry and Patio Doors

Door replacement cost in Edmonton typically starts at about $2,000 installed for a single steel entry door and about $2,500 for a sliding patio door, with sidelights, extra panels, and frame repairs increasing the price.

The ranges in this guide are typical installed figures for Edmonton homes, not a measured quote for one house. Canadian Choice Windows & Doors™ builds its standard entry doors in steel, with wood- and aluminum-clad doors available when you want those materials. Patio doors come in sliding, stacking, bifold, and tilt-and-turn styles, and the style sets the starting band before glass or hardware does. Glass, colour, hardware, and the condition of the frame you already have move the number within that band, or past it when the opening has to be rebuilt.

Key Takeaways

• A single steel entry door typically runs $2,000 to $2,500 installed in Edmonton, and a sliding patio door $2,500 to $5,000. Supply-only, without installation, they start at about $1,500 and $2,000.
• One sidelight, two sidelights, or a double door moves a steel entry unit into a higher band, and wood or aluminum-clad doors cost more than steel.
• Stacking patio doors typically start around $7,000 and bifold patio doors around $10,000, while a tilt-and-turn patio door is priced by quote.
• Glass, colour, hardware, and frame condition change the price. None of those has a flat dollar amount you can add at the kitchen table.
• CEIP is financing repaid on the property tax bill, not a rebate, and a door on its own may not meet the three-upgrade rule. SHARP offers Alberta seniors a loan or, for some lower-income households, a grant.

How Much Does Door Replacement Cost in Edmonton?

Door replacement costs in Edmonton typically start at about $2,000 installed for a single steel entry door and about $2,500 for a sliding patio door.

The table below shows typical installed ranges for Edmonton homes, from the simplest steel entry door to multi-panel patio systems. Each figure assumes the door, removal of the old unit, and standard installation in a sound opening. Wood and aluminum-clad entry doors and tilt-and-turn patio doors are built to specification, so they stay a quote. Your own number is set at the measured consultation, once the opening has been checked.

What Does the Installed Range Still Leave Open?

The band is a budget, not the number on your quote. It does not include GST, a custom height or width, or the labour to rebuild a rotten opening. A supply-only price covers the door alone, without removal of the old unit or installation. It starts at about $1,500 for a single steel entry door and $2,000 for a sliding patio door, so compare it only with another supply-only figure. Interior trim, exterior capping, and paint touch-ups can also fall outside a quoted band, so ask what's included before you compare two numbers.

Front Entry Door Costs by Configuration

Front door replacement in Edmonton is priced by layout: a single door, a door with one or two sidelights, or a double door. Each step adds glass, frame, and hardware, so the bands climb in that order.

A single door is the low band, typically $2,000 to $2,500 installed, or about $1,500 supply-only. A sidelight is a narrow glazed panel beside the door, and one sidelight moves the unit to roughly $2,500 to $4,000. Two sidelights (one on each side) and a double door both sit in the top steel bands because each adds a full extra frame section, more glass, and more weatherstripping to seal. A transom, the glass section above the door, has no band of its own and is priced with the unit it sits over.

Each door is made to order for your exact size, style, and finish, and the slab, glass inserts, and hardware can be configured to suit the house. Hardware choices include gripsets, levers, knobs, and deadbolts, and a heavier gripset with a keyed deadbolt costs more than a basic knob set. Finish works the same way: a standard colour sits inside the band, while a custom-matched colour moves the price toward the top of it. Name each of these choices on the quote so two estimates describe the same door.

The standard line is steel entry doors , made to the opening. A wider look at entry door costs in Canada compares more materials than these four steel layouts, including fibreglass and wood. Use it for national context, and use the Edmonton bands here when the door you are pricing is steel. Both point the same way: steel is the most budget-friendly material, and sidelights, custom glass, and oversized openings push any door up its range.

"Before we talk price, I ask homeowners how they use the entry and how much light they want in the front hall. A door with two sidelights brings in a lot of winter daylight, but it also means more glass to specify, so we settle the glass package first and let the band follow. Making those choices at the consultation keeps the quote you sign close to the budget you planned," explains Helen Sin, Consumer Success Manager at Canadian Choice Windows & Doors™ .

When Does Wood or Aluminum Cladding Cost More?

Wood or aluminum cladding costs more than steel, and the price is set by quote rather than by a published band. Wood and aluminum-clad doors are either all-wood on both sides or a wood interior with a durable aluminum exterior. All-wood front doors come as single or double swinging doors, with or without sidelights, in up to nine interior wood species. Aluminum-clad doors pair that wood interior with a low-maintenance exterior available in 50 powder-coated finishes, which suits homeowners who want the look of wood inside without refinishing the outside.

Patio Door Costs: Sliding, Stacking, Bifold, Tilt-and-Turn

Patio door replacement cost in Edmonton typically runs $2,500 to $5,000 for a sliding door, about $7,000 to $15,000 or more for a stacking door, and about $10,000 to $15,000 or more for a bifold door. A tilt-and-turn patio door is priced by quote, and panel count and opening width push any project up its band.

Patio doors differ in frame material as much as in style. The standard sliding door is vinyl, with double or triple pane glass, improved thermal breaks and seals, and a Low-E coating, a thin layer on the glass that reflects heat back into the room in winter. Bifold and stacking doors in the standard line are built with thermal commercial-grade aluminum, which carries wide glass panels without a bulky frame. All-wood and aluminum-clad wood versions are also available for sliding and multi-slide doors when you want wood on the inside.

Sliding and stacking patio doors run on a track. A sliding door uses two panels, one fixed and one that slides, so it is the simplest and most budget-friendly patio style. A stacking door uses three or more panels that slide and stack behind one another, opening a much wider part of the wall. Each added panel brings more glass, hardware, and track length, which is why the stacking band starts where the sliding band ends.

Bifold patio doors fold the panels aside like an accordion, opening most of the wall at once. More panels and heavier hardware are why the bifold band starts higher than any sliding door. The standard bifold includes a retractable hidden screen and laminated safety glass, both included in the price. The range assumes the opening you already have, so cutting a new or wider hole in the wall, with a new header above it, is structural work outside the band.

What Does a Tilt-and-Turn Patio Door Change?

Tilt-and-turn patio doors tilt in at the top for ventilation, or swing in like a hinged door. In the tilt position, the door stays locked and cannot be opened from outside, which makes it practical for a ground-floor room that needs fresh air overnight. Size, glass, and hardware are specified for that opening, so the price stays a quote rather than a published band. Don't borrow the sliding band and add a guess, because the hardware and how the door operates are different.

What Changes the Price of a New Door?

Exterior door replacement cost moves with six choices, and none of them has a dollar amount you can add in the abstract. Configuration comes first: single, double, sidelights, or a transom over the door. Glass is second: how much of the door is glass, whether it is double or triple pane, and whether the glass is decorative. Triple pane adds weight and cost, but it keeps the inside pane warmer through an Edmonton winter, which matters most on a door with large glass inserts or sidelights.

Material is the jump from steel to wood or aluminum cladding, or from the standard patio line to all-wood or aluminum-clad wood. Colour and hardware come next, and both have to be named on the quote. A custom-matched exterior colour and a keyed gripset with a deadbolt each move a door up its band. A standard finish and a simple lever set keep it near the bottom.

The last choice is the opening. A sound, square frame is a straight replacement. A soft sill, or a frame that needs rebuilding, is labour outside the band. Freeze and thaw at a threshold is the condition that shows up before the price does.

"On Edmonton entry doors, we check the threshold and the frame for square before we confirm the order, because years of frost can move both. Patio sills get the same check, so the new door is built and set for the opening as it really is. Planning that framework at the measure is what keeps the install day predictable," notes Tony Wong, Project Manager at Canadian Choice Windows & Doors™ .

What a Door Replacement Quote Should Include

A useful door quote names the door and the work around the opening, not a single total. Check these lines on any quote. They are a test of the scope, not a list of inclusions from one company.

• Removal and disposal. Who takes the old door away?
• Frame and threshold. Whether the new frame and sill are in, or the old ones stay.
• Trim. Who supplies it, and who paints?
• Sealing and insulation. The gap around the opening, not only a bead of caulk.
• Hardware. Which lock is specified, or that your old set stays.
• Finishing. Who owns the caulking and the touch-up.
• Warranty. Which coverage applies to the door and the installation, and whether it transfers if you sell.

Two totals match only when those lines match. A lower price that omits the frame or the haul-away is a smaller job, not a better deal. A window quote should include the same split for each opening: the product, the work around it, and the finishing. If windows are part of the same project, ours carry a 25-year transferable warranty . For the door, ask any company you compare to put its coverage in writing on the quote.

Some conditions cannot be confirmed until the old door is out. If rot shows up in the sill or the framing after removal, the quote should say how that extra work is priced. Approve it in writing before it starts, with a change order that names the work and the cost. That keeps the final invoice tied to what you agreed, even when the opening holds a surprise.

Repair or Replace?

Replace the door when winter is coming through it: a draft at the closed door, frost or ice on the threshold, a warped slab, a latch that will not catch, or fog between the panes. Fog means the seal in the sealed unit has failed, and a new sweep does not fix it.

A latch that is out of alignment, or a draft only at a worn sweep, can be adjusted. A new sweep, a moved strike plate, or a hinge adjustment is a small service call compared with a full unit. That is the limit of a repair. If the slab still closes and the frame is solid, price the adjustment before you price a new door.

When is a New Door the Only Useful Spend?

A new door is the useful spend when the frame will not sit square, the threshold is gone, or the seal between the panes has failed. Changing the sweep leaves those faults in the wall. A frame that has moved out of square lets air past every weatherstrip, so the draft returns with the next cold snap. A failed sealed unit lets moisture in between the panes, and that fogging does not clear with cleaning or adjustment.

Ways to Pay: CEIP, SHARP and Payment Plans

You can pay for a qualifying door project with city financing, with Alberta's program for seniors, or with our easy payment plan. Each has a test you must pass. A door purchase on its own does not automatically fit the first two.

How Does CEIP Work for a New Door?

The Clean Energy Improvement Program is financing, not a rebate. Residential owners can finance a minimum of $3,000 and up to $50,000 of retrofits, and they repay that amount on the property tax bill . The interest rate is fixed for the term, which runs up to 20 years or the useful life of the upgrade, whichever is shorter, and you can pay it off early without a penalty. If you sell, the remaining repayment can transfer to the new owner, because it is tied to the property tax.

Windows, doors, and insulation are eligible. Only new projects that start under the program qualify. The City of Edmonton currently offers no residential rebates, but it encourages participants to combine CEIP with other municipal, provincial, federal, or utility incentives. The program is near capacity: new pre-qualifications go on a waitlist, and intake pauses after 150 pre-qualifications.

The process starts with pre-qualification, followed by an EnerGuide home evaluation that identifies the upgrades with the most impact. You then choose a qualified contractor, submit the project application, and sign the agreements before any work begins. A post-project EnerGuide evaluation confirms the new rating once the upgrades are complete. Because the evaluation comes first, the upgrades it ranks highest are the ones the file is usually built around.

A residential file needs at least three upgrades, unless fewer will bring the home to net zero or you have used the program on that property before. A door on its own can't meet that test, while a door paired with windows and insulation can. Canadian Choice Windows & Doors™ is a CEIP-qualified contractor in Edmonton. CEIP outlines how cities run financing across Alberta municipalities .

What can SHARP Cover for a Senior's Door?

The Seniors Home Adaptation and Repair Program is for Albertans who are 65 or older, own the home, and live in it. SHARP financing for seniors is a low-interest home equity loan of up to $40,000 for repairs, adaptations, and renovations. A grant is available only to lower-income seniors who don't qualify for the loan, and it covers basic, essential repairs rather than upgrades. Check the current loan and grant rules with the Government of Alberta before work starts, since the door project has to fit what the program funds.

When Does the Easy Payment Plan Fit?

Our easy payment plan offers low monthly payments on any product. It fits when the three-upgrade rule doesn't, or when the household isn't eligible for the seniors program. It can also cover a single door, which is the job CEIP is least likely to accept on its own. The rate and the term are set on the agreement, so read both before you sign.

How Long Does Door Replacement Take in Edmonton?

Door installation in Edmonton usually takes 4 to 8 weeks from order to on-site installation, and crews typically replace a single door in several hours. Crews install year-round when weather conditions allow. The wait is in manufacturing, because each door is built to the measured opening rather than pulled from stock. Our window and door replacement team in Edmonton books the install date once the order is confirmed.

Every installer is factory-trained and licensed. Before the new door goes in, crews replace faulty or deteriorating frame components in line with Canadian Standards Association (CSA) guidelines. A soft sill found on site can change the hours. When the job is done, the crew clears the old door and the debris from the site.

What Turns Several Hours Into a Longer Day?

Sidelights, a multi-panel bifold, or a frame that has to be rebuilt take longer than a single slab in a sound opening. Lead time is still 4 to 8 weeks because the door is built to the measured opening. Weather that makes an open hole unsafe pauses the start. Plan for the entry to be open for part of the day, and keep a clear path from the driveway to the door for the crew.

Order the door after the measure, not from a width you remember. An opening that is off by a small amount can mean a door that will not seal, which is why the measure comes first. If windows are included, they are a separate budget and don't reduce the door band. Ask for them as separate lines so each part of the quote stays clear.

An Edmonton Door Budget Starts With the Style You Buy

In Edmonton, door replacement starts with a steel entry band or a patio band, and the style picks the band before glass or hardware does. A single steel door and a sliding patio door are the two starting points, at about $2,000 and $2,500 installed. Sidelights, stacking, bifold, and wood sit higher, and tilt-and-turn stays a quote.

The limit is the opening you have. A published range can't account for a worn threshold, a frame out of square, or whether new CEIP pre-qualifications are still being taken. Book a free consultation , and we will measure the door opening and confirm the configuration before we treat a range as your price.

Frequently Asked Questions

How Much Does It Cost to Replace a Front Door in Edmonton?

A single steel front door typically costs $2,000 to $2,500 installed in Edmonton. One sidelight, two sidelights, or a double door moves that figure into the higher steel bands, up to about $6,000. Wood and aluminum-clad doors cost more than steel, and only a measured quote sets that number. Supply-only steel doors start at about $1,500, and neither figure includes rebuilding a rotten frame.

How Much Does a New Sliding Patio Door Cost in Edmonton?

A sliding patio door typically costs $2,500 to $5,000 installed. Width, glass, and sill condition move the price within that range. Stacking doors and bifold doors cost more, and tilt-and-turn doors are priced by quote. Supply-only sliders start at about $2,000, a figure to compare only with other supply-only prices.

Is it Cheaper to Replace a Door and Windows at the Same Time?

Not as a discount on the door itself, but it can save time and repeat site work. One visit can cover the door and windows, so you don't have to wait for a second trip or a second round of removal and cleanup. The door is still priced on its own range, and the windows are a separate budget. Pairing them can also help a CEIP file meet the three-upgrade rule, and you can ask for each as a separate line to see every cost.

Can CEIP be Used for New Doors in Edmonton?

Yes, when the project qualifies. Doors are an eligible upgrade, and you repay the financing on your property tax bill. Only new projects that start under the program qualify. A door alone may not be enough, because a residential file usually needs at least three upgrades. Check whether pre-qualification is on a waitlist before you count on the financing.

How Long Does It Take to Replace an Exterior Door?

Edmonton orders are usually 4 to 8 weeks from measure to install. Installing a single door usually takes several hours, year-round when the weather allows. A damaged frame, a wide patio door, or an unsafe day for an open hole can stretch that visit. The lead time does not shrink because the install itself is short.